Posts Tagged ‘solar lighting’

http://www.MyTrustedGuideOnly.com/solar-lighting — The Secrets of Building Your Own Solar Energy

This page is a collection of solar lighting tips and hints. Choose what best fits to your criteria for solar lighting here!

To learn more about Solar Lighting and Energy, please visit :
http://www.MyTrustedGuideOnly.com/solar-lighting

Duration : 0:2:2

Read the rest of this entry »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

http://www.SolarWorks211.Com
“We Love Green Energy”
Do you know what solar can be used for?

Duration : 0:1:0

Read the rest of this entry »

Technorati Tags: , , , , ,

http://www.SolarWorks211.Com
“We Love Green Energy”
Making sense of Solar Power.

Duration : 0:1:31

Read the rest of this entry »

Technorati Tags: , , , , ,

Learn about Sol at Solar Power International 2009! What a great product! I want one!

Duration : 0:1:10

Read the rest of this entry »

Technorati Tags: , , ,

http://www.GetYouStars.com share with http://www.youtube.com/GetYouStars
We have already learned to wire solar cells in a series, the hard part is over. Now we can assemble our panel and produce electricity from the sun.
The solar panel box above was built using one sheet of 3/4 inch plywood for the base. It was framed out using 3/4 inch pieces of wood around the edges.
You can see in this picture that holes were drilled through the frame of the box to provide ventilation.
A layer of Masonite peg-board is cut to fit loosely in the wells and after being coated with UV guard placed inside the solar panel box.
When attaching the solar panel to the substrate you want to be careful not to damage it.
Lay your substrate material on to the solar cells positioning carefully and allowing the caulk to dry.
Using 2 pieces of properly gauged copper wire attach your positive leads and negative leads in series.
Each panel in a solar array needs to have a blocking diode installed to prevent damage to your batteries and inverter.
Once you have everything wired up and working properly you can install your Plexiglas top. Drill pilot holes to keep your Plexiglass from breaking using an appropriate sized drill bit.
Be creative in your choice of panel materials. I have seen old windows and new windows be used in homemade solar panel construction.
Please visit our website http://www.GetYouStars.com

Duration : 0:2:9

Read the rest of this entry »

Technorati Tags: , , , , , , , , , , , , , ,

http://www.powersave3400.com Cut Electric/Utility Bill 25% Power Save 1200 3400 Home Energy Saving Device Go Green Net solar kits! Do your part and GO GREEN at home! Save money and power today! http://www.powersave3400.com

solar generator, solar heat, solar heating, solar home, solar hot water, solar house, solar inverter, solar light, solar lighting, solar lights, solar modules, solar panel, solar panel cost, solar panel installation, solar panel manufacturers, solar panels, solar panels cost, solar photovoltaic, solar pool heating, solar power, solar power companies, solar power energy, solar power for home

http://www.powersave3400.com

Duration : 0:2:7

Read the rest of this entry »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , ,

For More Info or to Buy Now: http://www.hsn.com/redirect.aspx?id=il&url=http%3A//www.hsn.com/cnt/prod/default.aspx%3Fpfid%3D357755&afsrc=1&sourceid=youtube&cm_mmc=advsvc*youtube*na*357755
Provide lighting for storage sheds, utility rooms or other outdoor buildings with this handy Solar-Powered Shed Light with Dual-Mount Kit. It’s a great solution for lighting remote structures…
Prices shown on the previously recorded video may not represent the current price. View hsn.com to view the current selling price. HSN Item #357755

Duration : 0:10:25

Read the rest of this entry »

Technorati Tags: , , ,

http://www.35energy.com/
EASY TO MAKE SOLAR PANELS
Solar power is a very good source of power because it is renewable, environmental friendly and free. It would be a very nice idea to have a solar power system at home. However, due to the high setup cost ($2000 or more), not many people would use this system.
I am about to let you in on a little secret that can have you building your own solar panels for home use! By making your own solar power system that will save you thousands!
If you think buying a solar power system is too expensive for you, you can make it yourself with a much lower budget. You will need a solar panel first. You will use solar cells, wood plate, soldering iron, solder, flux, and tabbing to make a panel. These items are easy to get from local stores and you would not need any special tool. Even a novice can make it without problem.Solar panels are the wave of the future! So where do we start? How do you get your hands on the material to start building your own solar panels? Well lets first find out what solar panels are. That way you at least sound educated when you pitch this to your family!
Solar cells are almost always made from silicon, that is the same material we use to make computer chips. Silicon is one of the worlds most common elements, and is a leading component of sand and many kinds of rocks. A solar cell is built in layers, with two layers of silicon separated by a thin layer of insulating material. All three layers work together and convert sunlight into electricity.
When sunlight hits the solar cell, it produces an electric charge. Like a battery, the charge is positive on one side of the cell, and negative on the other side. Connecting a wire to the positive and to the negative side will allow electricity to flow. This flow, or current, can be used to power a small light bulb, turn an electric motor, or recharge a battery.
Broken solar cells can be bought for cheap money, and THEY STILL WORK! That is what I recommend. Of course you will need framing material to mount to the top of your house and two pieces of glass. The rest is pretty simple, hook your panels together, positive to positive and negative to negative, that way you get only 2 wires when you are done.Take these two wires and connect them to your power inverter and connect the power inverter to the electrical grid to your house. These steps seem hard but can be broken up into much simpler and easier steps.
I recommend this site if you want to get more in depth information and a step-by-step process of buying, installing and profiting from solar panels

Duration : 0:0:30

Read the rest of this entry »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Charge By Day
Energy from the sun is used to power this newly developed bright and reliable light giving
you the flexibility to locate this light anywhere outdoors. With LED lighting technology,
this Solar Motion Light efficiently delivers cool even light for practical uses like lighting an
outdoor walkway, doorway, or stairway to name a few. You can use this around your house,
for camping trips, and those hard to get to areas that would require wiring and an electrician.
The Solar Motion Light is the best way to Light It Up !

Light By Night
The Solar Motion Light is an environmentally friendly product designed to illuminate areas
around your home . With minimal effort to install, the charged solar panel powers the Solar Motion
Light at night for up to 6 hours at 90 second intervals.

For more information go to http://www.solarmotionlight.net

Duration : 0:1:45

Read the rest of this entry »

Technorati Tags: , , , , , , ,

http://www.35energy.com/
EASY TO MAKE SOLAR PANELS
Solar power is a very good source of power because it is renewable, environmental friendly and free. It would be a very nice idea to have a solar power system at home. However, due to the high setup cost ($2000 or more), not many people would use this system.
I am about to let you in on a little secret that can have you building your own solar panels for home use! By making your own solar power system that will save you thousands!
If you think buying a solar power system is too expensive for you, you can make it yourself with a much lower budget. You will need a solar panel first. You will use solar cells, wood plate, soldering iron, solder, flux, and tabbing to make a panel. These items are easy to get from local stores and you would not need any special tool. Even a novice can make it without problem.Solar panels are the wave of the future! So where do we start? How do you get your hands on the material to start building your own solar panels? Well lets first find out what solar panels are. That way you at least sound educated when you pitch this to your family!
Solar cells are almost always made from silicon, that is the same material we use to make computer chips. Silicon is one of the worlds most common elements, and is a leading component of sand and many kinds of rocks. A solar cell is built in layers, with two layers of silicon separated by a thin layer of insulating material. All three layers work together and convert sunlight into electricity.
When sunlight hits the solar cell, it produces an electric charge. Like a battery, the charge is positive on one side of the cell, and negative on the other side. Connecting a wire to the positive and to the negative side will allow electricity to flow. This flow, or current, can be used to power a small light bulb, turn an electric motor, or recharge a battery.
Broken solar cells can be bought for cheap money, and THEY STILL WORK! That is what I recommend. Of course you will need framing material to mount to the top of your house and two pieces of glass. The rest is pretty simple, hook your panels together, positive to positive and negative to negative, that way you get only 2 wires when you are done.Take these two wires and connect them to your power inverter and connect the power inverter to the electrical grid to your house. These steps seem hard but can be broken up into much simpler and easier steps.
I recommend this site if you want to get more in depth information and a step-by-step process of buying, installing and profiting from solar panels

Duration : 0:0:39

Read the rest of this entry »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , ,