Posts Tagged ‘solar energy’
Handle any emergency with Howcast’s First Aid app – http://howc.st/jkDRTe
Use the hot summer sun to keep your brewskies cool with this beer can cooler.
To complete this how-to, you will need:
Solar-powered garden lights
Phillips-head screwdriver
Wire cutters
Wire stripper
Voltage meter
Soldering materials
Diode
USB-powered drink cooler
Hot glue gun
Styrofoam cooler
Pencil
Knife
5V regulator (optional)
Always take extra precautions when working with electricity and sharp objects.
Step 1: Remove the solar panel
Disassemble the garden lights with the screwdriver and carefully remove the solar panel, which will have 2 wires attached. Using the wire cutters, cut off the ends, and then remove 1/4 inch of the plastic coating with the wire stripper.
Don’t cut the wires too short; it will make them more difficult to use.
Step 2: Test the voltage
With the solar panel in direct sunlight, touch the positive probe of the voltage meter to the solar panel’s positive wire and the negative probe to the negative wire. Check the voltage meter screen to see if the output is 5 volts.
Step 3: Get 5 volts
If your solar panel doesn’t generate 5 volts, add another solar panel by soldering the positive wire of the first solar panel to the negative wire of the second one.
You can add a 5-volt regulator to ensure that the voltage doesn’t surpass 5 volts.
Step 4: Add a diode
To prevent any electricity from flowing back into the solar panel, solder a diode to the solar panel’s positive wire. Make sure the diode’s stripe faces away from the panel.
Step 5: Prepare USB drink cooler
Cut off the flat end of the USB cord on the USB-powered drink cooler, exposing its wires. Strip about 1/4 inch of the coating on the red wire and the black wire, ignoring any other wire colors.
Step 6: Attach the solar panel for solar power
Solder the red wire of the USB cord to the positive wire of the solar panel and the black wire to the negative wire to attach the solar panel, and place the device in direct sunlight to make sure it powers up. Then, position the solar panel neatly onto the underside of the drink cooler and hot glue it into place.
Step 7: Prepare the beer can cooler
Place the drink cooler on the lid of the Styrofoam cooler so that the cooling element is facing down. Trace the outline of the drink cooler onto the Styrofoam lid and cut out the outline.
The smaller the Styrofoam cooler, the more effective the results will be.
Step 8: Finish the beer can cooler
With the solar panels facing up, fit the drink cooler into the lid until half of it protrudes through the bottom. Then hot glue it into place. Congratulations: You’ve got yourself a beer can cooler. Here’s to solar power!
On Norway’s Svalbard Islands, the sun never sets from April to August.
Thanks for watching How to Make a Beer Can Cooler that Runs on Solar Power! If you enjoyed this video, subscribe to the Howcast YouTube channel! http://www.youtube.com/subscription_center?add_user=howcast
Check out Howcast for other do-it-yourself videos from howcast and more videos in the Howto category.
You can contribute too! Create your own DIY guide (at http://www.howcast.com/videos/new ), learn about producing Howcast spots with the Howcast Filmmaker Program (at http://info.howcast.com/filmmakers ), or showcase your expertise in a Howcast video series (at http://info.howcast.com/experts ).
Duration : 0:3:7
I made this small 12 volt 4 LED (approx. 1w) solar emergency /general purpose light for the bedroom. I used a CD case as the housing for the light. It is powered by a 1.8w solar panel and a 7.5 amp hour battery. The solar charge controller has a timer function to control the LED and is programmable. I can make adjustments to the light output by adding more LEDs or a bigger solar panel if necessary. Google LED calculator for wiring and resistors needed.
Duration : 0:5:52
http://www.WINDENERGY7.COM – Solar Panel Cells and Solar Panel Cells systems are important to the performance of our Solar Panel Cell Kits. Review the home wind turbine systems featured on this video, exclusive technology, WindEnergy7-com has invented many of the best features in these systems making residential wind power work. There’s a reason why these systems are so successful and effective, it’s mainly the ideas and innovations developed by WindEnergy7-com. WindEnergy7 is the inventor of the Home Wind Turbine Kit.
From small Solar panels for maintaining batteries to portable solar panels, and in the wilderness and need some power for cell phones, GPS units, or Ipods. The main stumbling block to building solar panels is acquiring solar cells at a These second rate solar cells could probably be used to make a solar panel that USA made solar panels and photovoltaic products including solar cells, grid-tie systems, off-grid kits, solar attic fans at factory direct price. Theoretical research by scientists with the U.S. Department of Energy DOE’s Lawrence Berkeley National Laboratory Solar Energy Materials & Solar Cells is intended as a vehicle for the dissemination of research results on materials science and technology We are professional solar cell,solar module,solar panel manufacturers and factory.We can produce solar cell,solar module,solar panel according to your solar.
Nanosolar Technology Overview. Nanosolar prints solar cells and assembles panels to enable the most cost-efficient solar electricity. Our mission is to replace. Etón American Red Cross ARCFR160R Microlink Self-Powered AM/FM/NOAA Weather Radio with Flashlight, Solar Power and Cell Phone Charger Red thick epoxy-encapsulated silicon photovoltaic cell. Solid, almost-unbreakable module with solderable foil strips on backside. Ideal for. Edmund Scientific sells a variety of solar cells & panels to power your project with solar energy. Shop online for great alternative energy products. Hanwha SolarOne is a leading global manufacturer of PV cells and modules. Our goal is to bring the best value to our customers by offering the latest advances. Meter:buy wholesale Solar Panel Cells TPE Back Sheet for Encapsulation from DHgate.com,get worldwide delivery and buyer. The goal of achieving ever increasing solar cell efficiency and reduced cost demands accurate, repeatable, fast, and reliable test results. The research, design The development of the solar cell stems from the work of the French physicist Antoine-César Becquerel in 1839. Becquerel discovered the photovoltaic effect . A solar cell is any device that directly converts the energy in light into electrical energy through the process of photovoltaics. A solar cell is a device for converting energy from the sun into electricity. The high-efficiency solar cells you can buy at Radio Shack and other stores are made. Searches related to solar panel cells
Solar cells are devices that are used in solar panels for the purpose of converting light energy photons into electricity electrons through a process known. DuPont Photovoltaic Solutions enhances solar cell efficiency, extends module efficiency, lifetime, and reduces total system costs. Michael Davis, with permissionMaking Cheap, Inexpensive DIY Solar Panels at HomeMike Davis is an astronomer. To practice his hobby away from. HyperSolar intends to produce a thin, flat, clear solar concentrator, that could boost the amount of sunlight reaching solar cells by up to 400. China Solar Cell catalog and Solar Cell manufacturer directory. Import & Export Trade Platform for China Solar Cell manufacturers and global If you have a need for a special solar cell for your design and in large quantity over 1000 pieces, we’d be happy to help you select or design. In 1975 SANYO launched amorphous silicon solar cell development. Over the years, the company has surpassed many milestones, including the production of Solar Panel Cells — These solar cell panels are created with different things through different ways . It is a must to know how they are created. solar panel cells for sale solar panels how do they work first solar cell solar power cell phone chargers
A solar cell made from a monocrystalline silicon wafer. A monocrystalline solar cell. A solar cell also called photovoltaic cell or photoelectric cell is a solid state. solar power,green solar,solar panels,solar cells,solar kits,solar powered,qty’s solar cells, solar bulk,solar cells…by the pound,flat tinned wire,diy solar panels. The electical building blocks for solar panels or modules. The blue or black squares are silicon cells producing about .5 Volts each. Smaller panels. That ability occurred in 1953 when a Bell Laboratories employee Gerald Pearson had the bright idea of making a solar cell with silicon instead of selenium.
Duration : 0:3:39
My outside lights using a Velleman MK125 light sensor kit. I used 18/3 AWG wire to bring electricity from my battery banks to the front of the house. I used two positives and a common negative (both switched) to power the sensor and the lights in front of the house. The lights come on at dusk and go off at down with an adjustable sensitivity control knob. I also terminated my Malibu lights low voltage transformer and connected them to the sensor, I also replaced the Malibu light bulbs with LEDS.
Duration : 0:8:9
Pinoy’s are Truely Smart/Intelligent
)
SUBSCRiBE / COMMENT / RATE
)
Duration : 0:2:15
The installations of solar energy to home systems are environment friendly. Power stations will be relieved off huge burdens if every homes harness renewable energy sources to provide electricity or heating or lighting, also resulting in the reduction of carbon dioxide emissions, and other harmful gases. We could reduce energy demand from the use of fossil fuels; as a result we can conserve a greater percentage of the remaining fossil fuel reserves.
Duration : 0:1:40
My kitchen led lighting with 10 watt leds and home made heat sinks, one watt flat round leds, switches, malibu lights led
Duration : 0:18:24
Dennis Grubb briefly explains how the Solaro Day™ works.
There’s light outside, so turn off your old fashioned, power guzzling lights and plug into the power of the sun with the Solaro Day™. Start enjoying the benefits of solar-powered full spectrum natural sunlight in your life. The Solaro Day™ daylight simulator can be used inside your home, office or any other structure, on any level.
How does it work?
Starting out at the roof level, Solaro™ has designed a line of special proprietary solar panels that collect sunlight, even on cloudy days, and convert it into safe low voltage DC power. We send that power to a Solaro Day™ daylight simulator for use inside your home or office.
The Solaro Day™ daylight simulator will create the same light that a traditional or tubular skylight creates but without the costly installation including the cutting of a large hole in your roof or ceiling. You will also be able to experience the sun up, sun down and cloud movement inside when your Solaro Day™ is powered directly by the solar panel, just as you would experience with a skylight.
The Solaro Day™ typically requires only a 1/2 inch diameter hole drilled into your roof for the interconnect cable making the installation fast and simple!
-Strong 25 year warranty on the solar panel and diffuser, 10 year warranty on the Opto Semiconductor and light engine.
- The Opto Semiconductors used in the Solaro Day™ are better than basic LEDs because they have a brighter light and longer life span.
- Proprietary solar panels made with multicrystalline solar cells are designed to collect sunlight even on cloudy days, convert it into safe low-voltage, high performing simulated daylight. Outperforms tubular skylights in low light, on cloudy skys, and early and late day.
- Durable white powder coated fixture will last for decades.
- The diffuser is made of modified acrylic and masterfully hides the individual Opto Semiconductors to give a smooth appearance with a very minimal loss of light.
- The Solaro Day™ will also encourage plant growth because it provides the light colors plants need for growth. The Solaro Day Grow Light is also available specifically designed to provide plants with only the light they need to produce a beautiful healthy plant indoors without wasting energy producing light they don’t need.
-Provides simulated natural, healthy sunlight that makes bright, happy spaces with the same full spectrum light as sunlight.
-NO harmful UV produced by this light so no need to worry about fading carpets and furniture using the Solaro Day™. Both incandescent and fluorescent lights produce UV but the Solaro Day™ does not.
- Installation is not inhibited by the structure of a building. It can be installed anywhere!
- Creates the same daylight as a traditional tubular skylight without costly installation or cutting large intrusive holes in your roof or ceiling.
- Easy installation. A small ¼” diameter hole in the roof and a 4″ hole in the ceiling for the remodel box, snap together the interconnect cable and it’s done. Fast and simple.
- Each kit includes all mounting hardware and 25 feet of 18 gauge double insulated copper wire manufactured to be weatherproof and sunlight resistant which insures the best powering and low energy loss over longer runs. Additional lengths of wire are available for purchase. For wire runs from 1-50 feet use 18 gauge wire, 50-100 feet 14 gauge and 100+ 12 gauge.
- As portable as any other ceiling type fixture. You can take it with you when you move. Can you say that about a skylight?
- Electronics of highest quality with latest technology.
- Helps keep the planet green. Conserves energy, promotes off-grid independence, reduces landfill.
- No harmful substances in the bulb. Fluorescent bulbs contain mercury that is a toxic substance and dangerous to your health.
- The Solaro Day™ is a truly green product! Over the entire life of the light — from manufacturing to disposal — the energy used for incandescent bulbs is almost 5 times that used by the Opto Semiconductors in the Solaro Day.
- The Solaro Day™ has various powering options available. You can use it powered directly by the solar panel, from a battery backup, or from AC. If you want to power a few of the Solaro Day™ from one solar panel, you can do that too.
- American designed, American engineered and American made for quality and durability.
The engineering department at Solaro Energy™ has been designing skylights and solar powered point of use products for over 20 years with several patents to their credit, so we know sunlight and how to use it for man’s benefit. We are confident that not only will the Solaro Day™ bring lower energy bills, but will bring comfort to your home and family!
Duration : 0:2:9
Solaro Energy – POP Displays for use at home shows featuring the Solaro Day and the Solaro Aire.
There’s light outside, so turn off your old fashioned, power guzzling lights and plug into the power of the sun with the Solaro Day™. Start enjoying the benefits of solar-powered full spectrum natural sunlight in your life. The Solaro Day™ daylight simulator can be used inside your home, office or any other structure, on any level.
How does it work?
Starting out at the roof level, Solaro™ has designed a line of special proprietary solar panels that collect sunlight, even on cloudy days, and convert it into safe low voltage DC power. We send that power to a Solaro Day™ daylight simulator for use inside your home or office.
The Solaro Day™ daylight simulator will create the same light that a traditional or tubular skylight creates but without the costly installation including the cutting of a large hole in your roof or ceiling. You will also be able to experience the sun up, sun down and cloud movement inside when your Solaro Day™ is powered directly by the solar panel, just as you would experience with a skylight.
The Solaro Day™ typically requires only a 1/2 inch diameter hole drilled into your roof for the interconnect cable making the installation fast and simple!
-Strong 25 year warranty on the solar panel and diffuser, 10 year warranty on the Opto Semiconductor and light engine.
- The Opto Semiconductors used in the Solaro Day™ are better than basic LEDs because they have a brighter light and longer life span.
- Proprietary solar panels made with multicrystalline solar cells are designed to collect sunlight even on cloudy days, convert it into safe low-voltage, high performing simulated daylight. Outperforms tubular skylights in low light, on cloudy skys, and early and late day.
- Durable white powder coated fixture will last for decades.
- The diffuser is made of modified acrylic and masterfully hides the individual Opto Semiconductors to give a smooth appearance with a very minimal loss of light.
- The Solaro Day™ will also encourage plant growth because it provides the light colors plants need for growth. The Solaro Day Grow Light is also available specifically designed to provide plants with only the light they need to produce a beautiful healthy plant indoors without wasting energy producing light they don’t need.
-Provides simulated natural, healthy sunlight that makes bright, happy spaces with the same full spectrum light as sunlight.
-NO harmful UV produced by this light so no need to worry about fading carpets and furniture using the Solaro Day™. Both incandescent and fluorescent lights produce UV but the Solaro Day™ does not.
- Installation is not inhibited by the structure of a building. It can be installed anywhere!
- Creates the same daylight as a traditional tubular skylight without costly installation or cutting large intrusive holes in your roof or ceiling.
- Easy installation. A small ¼” diameter hole in the roof and a 4″ hole in the ceiling for the remodel box, snap together the interconnect cable and it’s done. Fast and simple.
- Each kit includes all mounting hardware and 25 feet of 18 gauge double insulated copper wire manufactured to be weatherproof and sunlight resistant which insures the best powering and low energy loss over longer runs. Additional lengths of wire are available for purchase. For wire runs from 1-50 feet use 18 gauge wire, 50-100 feet 14 gauge and 100+ 12 gauge.
- As portable as any other ceiling type fixture. You can take it with you when you move. Can you say that about a skylight?
- Electronics of highest quality with latest technology.
- Helps keep the planet green. Conserves energy, promotes off-grid independence, reduces landfill.
- No harmful substances in the bulb. Fluorescent bulbs contain mercury that is a toxic substance and dangerous to your health.
- The Solaro Day™ is a truly green product! Over the entire life of the light — from manufacturing to disposal — the energy used for incandescent bulbs is almost 5 times that used by the Opto Semiconductors in the Solaro Day.
- The Solaro Day™ has various powering options available. You can use it powered directly by the solar panel, from a battery backup, or from AC. If you want to power a few of the Solaro Day™ from one solar panel, you can do that too.
- American designed, American engineered and American made for quality and durability.
The engineering department at Solaro Energy™ has been designing skylights and solar powered point of use products for over 20 years with several patents to their credit, so we know sunlight and how to use it for man’s benefit. We are confident that not only will the Solaro Day™ bring lower energy bills, but will bring comfort to your home and family!
Duration : 0:3:54
My solar setup part two of two.