Posts Tagged ‘FREE’
…by how fast this spins. This solar technology power, will gain massive improvements in the progress of miles per gallon!. The following tells the new story of solar cell photovoltaic’s applications and the science & developing markets that have been overlooked and underdeveloped. We wish to call your attention to “rotating photovoltaic cells, producing power.” Here’s an aerodynamic futuristic design from our engineers:
Try it! Sample it! Test drive it! Burn rubber with it! Spin out with it! Use it on a trial basis- just sample our (pp) wares. We have devised this introduction to high speed rpm rotations of a solar photovoltaic for use on earth and in space. (we have a rotary solar airplane in the works)
Once dismissed as a mere impossibility by all the “experts” the newer versions of photovoltaics in high spinning RPM applications are becoming the dominant force in the understanding and design of working progressive solar power. We have re-invented the in-wheel motor with solar tilting technologies. This “solar pv wheel” could be the tire of the future, with a solar powered propulsion agenda in place of the current hubcap (or spokes, et. al.) (p.p.) Our eco designers are working on a earth friendly “hubcap” with slip ring construction to travel multiple currents thru the car or directly to a motor attached to the wheel hub. (this has a motor attached directly to the solar cell underside, and direct to the wheel.) With “tilting technologies” both the car and wheel are able to seek greater sunlight. pp Our convex cell array will gain the higher angle of incidence to the sun’s light- and they flip up and out, for further volts when vehicles are parked.
Cars can run off of renewable energy and here’s the proof.
We have additional solar wheel inventions that superceede the outputs of the wheels shown. The spin cools down the solar cells array and adds efficiencies. Watch for our solar dome hubcaps to slip onto your car!
devonshirewellsford.com
Duration : 0:0:48
How to Assemble Harbor Freight Chicago Electrics 45 Watt Solar panel Kit
Duration : 0:7:23
http://green-power-diy.com/
Reducing Your Energy Needs before Going Green With simple instructions available on how to convert to homemade wind power or DIY solar panels for as little as $200, many people are taking the alternative energy more seriously. When choosing to take on a DIY conversion project the first question most people ask is will one windmill or one large solar panel be enough? There are too many factors involved here to answer that question for you. But one way to start is to ensure your home is efficient in the first place. In this article we will walk you through some steps that will help you reduce your energy consumption before you start converting your home.
Reducing Your Energy Needs
One often overlooked step in converting a home to green power is reducing your energy needs in the first place. The average home uses inefficient lighting, power hungry appliances, and poor heating/cooling solutions. An important step to reducing your energy needs is to look at the inefficiencies in your current system.
Consider: 1. Replacing old incandescent bulbs with fluorescents or led bulbs will cut your power consumption from light in half.
2. Replacing old, inefficient, appliances may reduce your energy bills by as much as 30% by itself.
You should also look at your current heating/cooling solutions. For example an electric hot water heater could potentially be replaced by a solar water heater. Maybe that inefficient air conditioner can be replaced with a more efficient heat exchanger. If you need help choosing more efficient appliances, an excellent resource for this is put out by the Canadian government: http://oee.nrcan.gc.ca/EnerGuide/home.cfm. It’s called Energuide, and it covers everything power consumption of home appliance to energy requirements of large commercial air conditioners.Spend some time looking through that guide and calculating how much you can reduce your power consumption in different areas of your home. By simply taking a look at everything in your home that consumes energy, you will find ways to reduce your energy needs before you start.You don’t necessarily have to go all out and spend $10,000 replacing everything — but things as simple as changing your lighting will reduce your energy needs before you start your conversion project.
http://green-power-diy.com/
Duration : 0:5:21
http://greenpowerscience.com/SOLARPANEL124.php
These are the 124 watt rollable solar panels tied in parallel to produce 230 watts of grid supplemented power. The panels are rated at 124 watts but the inverter uses a bit of power. This inverter is rated at 600 watts.
http://www.youtube.com/watch?v=hANi5NbcY5g
http://www.youtube.com/watch?v=J3b_fGUnaFE
Duration : 0:1:22
Part one of Installed/upgraded zero gauge cables on the battery banks and 04 gauge on the outback mppt controller. Also how I made custome brackets for the solar panels installation on the roof.
Regards, Raz
Duration : 0:5:18
I’ve updated my system with 2 more batteries that will give me 440 amp hours, added some wood planks for more support on my shelf, a 60 amp breaker, and some small emergency lighting. Overall I believe this system will support my needs for a true emergency backup system providing hours of emergency power.
Duration : 0:4:28
My kitchen led lighting with 10 watt leds and home made heat sinks, one watt flat round leds, switches, malibu lights led
Duration : 0:18:24
In the remote island of Sitio Pagatpatan, Baranggay Codon, San Andres,Catanduanes, twenty seven families (27) mainly rely on firewood from nearby forests for night lighting, cooking and even for earning additional income in order to survive everyday living in the village. Such lifestyle does not only have a huge impact on the quality of life at the village but also on the depleting global environment. In addition, burning of firewood for cooking and night lighting have caused house fires and accidents and have exposed families to hazardous fumes.
Faced with these pressing problems, Councilor Jonathan Joson of San Andres, Catanduanes, in partnership with the Youth without Barriers’ Solar Power Initiative (SPIN) Project, came up with a decentralized rural electrification project for the said Baranggay dubbed as “Give Light, Change Lives in Codon” Project. The endeavor aims to provide households in Baranggay Codon access to free, clean and renewable power through the use of solar energy, and thus address the energy poverty situation in the community of Codon.
Conceptualized in 2010, the Spin Project targets remote and disadvantaged communities which do not have access to electricity and helps them utilize the energy from the sun through reliable and cost-effective solar lighting systems. SPIN does not only endeavor to inspire and empower people in rural villages to take advantage of an abundant resource but also to create and raise awareness on cleaner and sustainable ways people can use electricity, and, thus, find long-term solutions to the problem of energy poverty in our country.
Get involved now.
Help us bring solar power to Codon. Help us transform their lives into profoundly positive ways. Make a difference by supporting this Project.
To donate please visit www.spinproject.webs.com
Duration : 0:4:8
The Solaro Aire™ is the world’s most advanced solaro powered attic ventilation system!
There’s light outside, so turn off your old fashioned, power guzzling lights and plug into the power of the sun with the Solaro Day™. Start enjoying the benefits of solar-powered full spectrum natural sunlight in your life. The Solaro Day™ daylight simulator can be used inside your home, office or any other structure, on any level.
How does it work?
Starting out at the roof level, Solaro™ has designed a line of special proprietary solar panels that collect sunlight, even on cloudy days, and convert it into safe low voltage DC power. We send that power to a Solaro Day™ daylight simulator for use inside your home or office.
The Solaro Day™ daylight simulator will create the same light that a traditional or tubular skylight creates but without the costly installation including the cutting of a large hole in your roof or ceiling. You will also be able to experience the sun up, sun down and cloud movement inside when your Solaro Day™ is powered directly by the solar panel, just as you would experience with a skylight.
The Solaro Day™ typically requires only a 1/2 inch diameter hole drilled into your roof for the interconnect cable making the installation fast and simple!
-Strong 25 year warranty on the solar panel and diffuser, 10 year warranty on the Opto Semiconductor and light engine.
- The Opto Semiconductors used in the Solaro Day™ are better than basic LEDs because they have a brighter light and longer life span.
- Proprietary solar panels made with multicrystalline solar cells are designed to collect sunlight even on cloudy days, convert it into safe low-voltage, high performing simulated daylight. Outperforms tubular skylights in low light, on cloudy skys, and early and late day.
- Durable white powder coated fixture will last for decades.
- The diffuser is made of modified acrylic and masterfully hides the individual Opto Semiconductors to give a smooth appearance with a very minimal loss of light.
- The Solaro Day™ will also encourage plant growth because it provides the light colors plants need for growth. The Solaro Day Grow Light is also available specifically designed to provide plants with only the light they need to produce a beautiful healthy plant indoors without wasting energy producing light they don’t need.
-Provides simulated natural, healthy sunlight that makes bright, happy spaces with the same full spectrum light as sunlight.
-NO harmful UV produced by this light so no need to worry about fading carpets and furniture using the Solaro Day™. Both incandescent and fluorescent lights produce UV but the Solaro Day™ does not.
- Installation is not inhibited by the structure of a building. It can be installed anywhere!
- Creates the same daylight as a traditional tubular skylight without costly installation or cutting large intrusive holes in your roof or ceiling.
- Easy installation. A small ¼” diameter hole in the roof and a 4″ hole in the ceiling for the remodel box, snap together the interconnect cable and it’s done. Fast and simple.
- Each kit includes all mounting hardware and 25 feet of 18 gauge double insulated copper wire manufactured to be weatherproof and sunlight resistant which insures the best powering and low energy loss over longer runs. Additional lengths of wire are available for purchase. For wire runs from 1-50 feet use 18 gauge wire, 50-100 feet 14 gauge and 100+ 12 gauge.
- As portable as any other ceiling type fixture. You can take it with you when you move. Can you say that about a skylight?
- Electronics of highest quality with latest technology.
- Helps keep the planet green. Conserves energy, promotes off-grid independence, reduces landfill.
- No harmful substances in the bulb. Fluorescent bulbs contain mercury that is a toxic substance and dangerous to your health.
- The Solaro Day™ is a truly green product! Over the entire life of the light — from manufacturing to disposal — the energy used for incandescent bulbs is almost 5 times that used by the Opto Semiconductors in the Solaro Day.
- The Solaro Day™ has various powering options available. You can use it powered directly by the solar panel, from a battery backup, or from AC. If you want to power a few of the Solaro Day™ from one solar panel, you can do that too.
- American designed, American engineered and American made for quality and durability.
The engineering department at Solaro Energy™ has been designing skylights and solar powered point of use products for over 20 years with several patents to their credit, so we know sunlight and how to use it for man’s benefit. We are confident that not only will the Solaro Day™ bring lower energy bills, but will bring comfort to your home and family!
Duration : 0:4:34
My solar setup part two of two.